PlexiFlex is our registered
trademark of a unique image presenting system. It is made by
face-mounting a print underneath a clear acrylic sheet using
optically clear adhesive and back-mounting on a supporting substrate
with an easy hanging system attached to it. It displays an image
PlexiFlex enhances the image
quality visually by reducing light scattering because face-mounting
keeps the print perfectly flat and smooth, and therefore increases
the sharpness, color saturation, and contrast of the image.
PlexiFlex protects the print
from dusts and moisture by permanently sealed the print in two
pieces of substrates. The UV inhibitor in the acrylic sheet and the
adhesive blocks the harmful UV light from reaching the print.
Therefore the longevity of the image is extended.
PlexiFlex is very easy to
install thanks to the inset frame in the back. It is ready to hang
right out of the box. With the recessive design of the inset frame,
once the PlexiFlex is installed, the picture looks like it is
floating off the wall.
There are many variations of
PlexiFlex. The Plexiglas can be shinny or non-glare; it can be
abrasive-resistant. The backing could be on different kind of
substrates. For example, it can be Sintra, Dibond, or Acrylic. Both
front and back can be at different thickness.
The edges can be polished as
shinny and smooth as the front.
The PlexiFlex can also be
framed in a shadow box instead of
using inset frame. The shadow box adds another layer of protection
because the edge is covered by the frame and the surface is recessed
in the frame.
Free sample is available upon
request, please call for details.